Yandex Dzen.

For lovers of exclusive details of the wardrobe, we suggest binding the exotic cap - Chalm. You can wear it with the most ordinary plain coat, it will play in a new way with a similar headdress.

For lovers of exclusive details of the wardrobe, we suggest binding the exotic cap - Chalm. You can wear it with the most ordinary plain coat, it will play in a new way with a similar headdress.

Hat-chalma Suitable for any shape of the face and head. Ideally, a hat on the heads of women who have oval faces and a high forehead, but this is not a prerequisite.

Now Chalma is worn not only by representatives of the Eastern world and Muslim women, but also European fashionista.

There are 3 types of caps-chalma: classic, oriental and retro. Different design feature.

Knit chap-chalma needles. With step-by-step MK + photo

Option number 1.

We will need:

Camilla yarn from Vita (100% acrylic) 1 Mok, Spokes No. 4.

First, we remove the measure - scuffing the head. For a volume of 56 cm. We recruit 23 loops and knit in 2 yarns of the English elastic band the length above (84 cm). We divide 56 cm on 2 and multiply on 3 the result obtained - 84 cm leaves.

We put one side diagonally and sew in the form of a chalm, caught by the size of the head.

Knit chap-chalma needles. With step-by-step MK + photo

There are a variety of viscous options for Chalms. What's intricate the pattern. Especially interesting is the hat.

For example, here is a knitting scheme of a beautiful relief.

Knit chap-chalma needles. With step-by-step MK + photo
Knit chap-chalma needles. With step-by-step MK + photo

Option 2 with loop add

For this model use thin needles.

Yarn is chosen depending on the time of year.

Scheme for 12 loops: 1st p: l; 2nd p: and; 3rd p: * 1I; 2l *; 4th r and all even: in drawing; 5th p: * 1I 2l Crosspin the right (2nd loop to penetrate the face for the back wall, without removing from the needles, and 1st for the front wall, remove on the second knitting needles) *.

Repeat rapport 8-10 rows (approximately 4 cm).

Then to start the addition of the loops: in each facial row, it is evenly adding to 5 loops in each crossed loop.

Thus knit 28 rows (12-14 cm).

Continue according to the scheme without adding.

After 5 cm of the canvas, start the outflow: in each hollow row to penetrate 2 loops between crossed.

The remaining 4 cm clearly follow the scheme. Close knitting any convenient way.

The product is ready.

Scheme:

Knit chap-chalma needles. With step-by-step MK + photo

Master Class on Knitting Caps-Chalma

Knit chap-chalma needles. With step-by-step MK + photo

Calculate the loops: you should turn out to be in the width 10-11 cm. In this master class, it turned out 19 loops. Tie a sample from your yarn, taking into account the fact that the number of loops should be more than six and +1.

Hat Chalm the needles knit relief rubber band.

The first row: 1 is broken., 2 persons., We repeat to the end alternating loops.

The second row and the remaining even knit in the drawing.

Third row: 1 out., 1 loop of persons. For the rear wall and without removing it with 1 loop of persons. For the front. Thus, we repeat such a way to knit three loops to the end.

Fifth row as well as the third.

Rubber knit 4 cm.

Knit chap-chalma needles. With step-by-step MK + photo

Each facial row makes five additives.

Addressing: in 1st row after two facial (5 additives), in the third front line - in front of the persons. And 1 is elevated. (5 additives). We alternate additive options. This will give a uniform expansion of our chapter Cham.

In order not to get holes in the product, it is better to make an increase in front of the hinges.

Prescriptions are made until there are 6 wrong loops on extreme tracks.

On other tracks stop adding when it is 11th is. loops. Different loops do not take into account.

5-6 cm knit without add-ons. And then begin to make a reduction: in the front rows knit 5 times 2 loops of the wrong. In order to avoid skewing, the accumulation is placed in turn - first in front of the persons., Then after.

Knit chap-chalma needles. With step-by-step MK + photo

The refusal is made until they leave 1 out. The loop on each track except the average. It must be left 2 out. loops. Deliver loops for 10 pieces. Knit separately every half of 28-29 cm. We have them, the tips are sewn at the edges - rim. We sew ends. Cap is ready !!! (Source: http://larecmasterici.ru)

Knit chap-chalma needles. With step-by-step MK + photo

And several photos, where the variety of models and crosslinking methods are shown.

Knit chap-chalma needles. With step-by-step MK + photo
Knit chap-chalma needles. With step-by-step MK + photo
Knit chap-chalma needles. With step-by-step MK + photo
Knit chap-chalma needles. With step-by-step MK + photo

Knick with pleasure!

Subscribe to My Channel, put the class !!!

To new meetings! While.

Chalma recently finds fans among the female representatives.

After all, it is in this headdress that you can always stay a woman who looks gorgeous. Its classic option provides for twisting from a long canvas, but our skillful needlewomen recreated it for winter cold.

Therefore, we want to give you inspiration with the explanation to tie the Chalm with their own hands.

How to tie a chalm: an easy way from the canvas

The basis of the knitting is a simple scarf. You can take any way, but the gum (any) will more successfully look. Moreover, it will be tightly forming the product shape itself. We offer you a simple variant of the formation of chum from knitted canvas.

  • Pattern, repeat, you can choose any. For example, it will be very impressive Volumetric gum. Alternatively, you can use for knitting the following schemes.
SchemesSchemes
Pattern schemes
  • Next, you need to calculate the width of the canvas, pushing out from the report and the volume of your head. But on average, as in our example, you will need 21 loops. That is, it is 4 loops of the pattern 4 times = 16, plus 3 loops for symmetry, and 2 edges.
  • When you scored the desired number, then Slip the first loop face! To the extreme row was smooth and neat. After all, if you shoot it, the loop will go on two loops, so it can spoil the whole look. Then 2 persons. For symmetry and after already follow the report: 1 is ez., 3 persons. Complete also persons. and Last invalid!
You can use a simple gum with thick yarnYou can use a simple gum with thick yarn
You can use a simple gum with thick yarn
  • After the reversal, make the first loop and tie 1 individuals. And follow exactly the same report. One medium loop should always coincide with the pattern. That is, to be on the one hand face, and on the other - only the wrong one. The rest of the loops alternate. Complete a number of 2 persons. and 1 is elevated. Note that if you knit on the wrong loop, then you need to do a loop for the front wall, and on the front-hand.
  • Knit the required band length - approximately 90 cm. But focus on your head. Now you need to close the loop. To do this, just close them for the front wall with an invalid loop, and for the rear - with facial. And try Do not tighten the loops.
  • Watch as shown in the diagram and sewing strips. First, make the seams on the back of the back, and after the side openings are already built. Need to sew on the front side, Stretching patterns.
Discharged ChalmaDischarged Chalma
Knitana Chalma

Video: Knit Turban from the canvas

How to quickly contact Chalma with circular knitting needles?

This is one of the easiest and most quick options when even newcomer will be able to create such beauty. But it should be the first to specify the choice of the thread.

Rollers are formed due to alternation of rowsRollers are formed due to alternation of rows
Rollers are formed due to alternation of rows
  • Learn better on thicker yarn. Also replicate your region. For example, for severe frosts, it is good to use Caucasian or merino yarn. By the way, the thick thread will be good to keep rollers. If you go to make a wool or alpaca, then be prepared to create an additional lining. For the spring-autumn period it will be possible to exclude.
  • Now determine the number of loops. If you have a thin thread, then It will take 100 loops for thicker yarn - 80. But in order not to guess, check the square 20 to 20. And already on this number of 1 cm you can calculate the desired set.
  • Start work with involving rows! Then the first roller will have the right vico. Slip 5 rows, but do not connect to the ring. That is, knit a number of involves, turn the product and pass through the facial loops on the pattern.
  • And now we are closed in the ring. It is more convenient to work on small knitting needles. Otherwise, it will be necessary to stretch every time the fishing line. The facial row starts for the far wall, the second row is for the front.
Color and decorations set mood
  • In general, you should get 7 rollers out of 5 irons and facial rows. And so at the expense of this shift and protrusions will be formed. Now in the very last row of the facial segment starts to make the closure of the loops. In this case, they will not be seen, since the invalid row will hide with its protrusion.
  • Close through 4 loops. If you have a thin thread, then after 5. There are another 5 outbreak ranks. And now, spend the complete closure of the loops. It is worth connecting the third knitting! Removing immediately from two sides.
  • For this, the product fold in half and remove the neighbor, then the long loop. Now this resulting loop will return to the near needles. Take two loops on this and 1 for a long needker. And so repeat to closure.
  • Now I do not cut this thread, but it fastens the folds ahead of the Calma. You can do this with the help of a needle, just stitching them a bit, but you can just stretch several times with the hook. And it remains to sew that segment when the work was not yet in a circle.
  • In conclusion you only need to decorate the beautiful brooch and Chalma ready!
  • By the way, you can perform the first rows of rubber band 1 to 1 or 2 to 2. The treatment will not lose its refinement.
Can be performed with rubber bandCan be performed with rubber band
Can be performed with rubber band

Video: Knit Chalm in a circle

How to tie a chalm to the needles?

We bring to your attention another version of knitting chalms. It can have several slightly modified interpretations. For example, you can adjust the thickness and number of harnesses. But the basic knitting from this does not change.

  • We propose to consider the option with 10 strips. To do this, it is necessary to make an elastic band 4-5 cm, 10-12 cm wide. Since the report provides for a replay of 6 loops and 2 edges. Therefore, in the end we have 30 loops.
  • The first row is in line with a circuit 1 Pour and 2 facial, while the very first loop make the front, the last one is invalid.
  • Follow the diagram in the drawing. 3 row are also starting with the facial for the beautiful edge and repeat the report: 1 is eva., Binding from 2 persons. Behind the back wall. That is, remove the loop, leaving behind the work, tie the next front loop and return to the removed.
Beginning of workBeginning of work
Beginning of work
  • Start Addition of 9 loops in each row. At the same time, note that it needs to be done in the face. To make a uniform increase, make an eye over first before the front loop, and later a row - after. But to minimize the resulting openings, then it is better to make an attachment before the invalid loop. True, in this case, the extension will have one slope.
AdditionAddition
Addition
  • It continues until you increase the amount of invalous loops to 11, and on extreme segments - 6 loops. And only after 5-6 cm, start to make such manipulation with reduction.
ReflectionReflection
Reflection
  • As a result, you should also get out of 1 out. The loop in the extreme canvases and 2 is broken. In the middle.
  • Separate the segment of 5 lanes. And continue to knit another 27-29 cm. But see how much you need for volume. Shift them back As shown below.
Laying designLaying design
Laying design
  • Stick these tails strips, more precisely their ends, with a styling segment at the very beginning. Take and post along the main design.
  • Note that it is necessary to sew from the front side, since the reverse seam can give too explicit bend. But thread is necessary just to push parts of the canvas.
ResultResult
Result
  • By the way, you can perform a gum wider. But in this case, then you should do and the initial cut is longer. Although we suggest excluding it at all. That is, start with 8-10 loops with a sharp increase of 2-3 loops in each facial loop in subsequent rows.
  • To do this, there is a facial loop to stick three times: crossed front, behind the front wall, again for the back. On the involving side, touch the drawing. So do 4 rows. And then follow the drawing.
With a wide rubber bandWith a wide rubber band
With a wide rubber band

Video: Knitana Chalma do it yourself

A source

Over the past few years, hat-chalma, creating a mysterious image, has become very popular. The article provides a detailed description of how to tie this headdress, and video to create it in several options.

Simple performed, Chalma is characterized by special chic

History of the head of the head

Homeland Most varieties of hats-chalms are Asia, North Africa, India. Sometimes the headdress is called the turban, although in fact it has large sizes.

Traditionally, Chalme in hot countries are not only women, but also men. She protects from the scorching desert sun, its free end can be covered with the face from the wind and dust. In Central Asia, Chalma was allowed to wear only wealthy people. The festive option was expanded by precious stones and adorned in every possible way.

From East to Europe, Chalma came in the times of the Crusaders who appreciated the wearing hats in their campaigns. The headdress has become a fashion attribute from noble ladies and cavaliers.

In the 20th century, Chalmie wore the stars of the world and Soviet cinema, new models could be found on the pages of the fashion magazine. It was then that women began to invent various options, how to tie the turban with knitting needles or crochet, lush columns.

Chalma became part of unique images

Today, Chalma has become a stylish accessory, it helps to create an unusual image and emphasize individuality. The most popular models decorated with large brooches, rhinestones and beads.

Creating an image

Women's hats knitted with their own hands are at the peak of popularity. But that the women's Chalma looks good, it is important to take into account some of the features of its creation. In addition, knit-connected hats should be combined with other wardrobe items.

Texture and color

The volume of turbans are obtained through the use of embossed patterns. Matches can be used absolutely any - harnesses, braids, various complex schemes and interlacing. But even simple gum 2x2 allows you to get an interesting product.

Winter version of the chalms can be made of mohair, Angorers, cashmere and other types of wool. Spring and autumn models are created from acrylic, cotton, velor threads.

The choice of color scheme is determined by the personal taste preferences of a woman. It can be natural shades, pastel tones or bright, saturated colors. The main thing is that the finished model harmonize with the upper clothes and other accessories.

The girl in the turban looks like a princess from a fairy tale

What to wear

Feminine and sophisticated Chalma harmonies with fur coats with a short pile and a coat of various cut. No less stylish accessory in combination with a leather jacket and a shortened down jacket.

Thin models can be inside indoor dresses, trousers, jackets and skirts. You should not exclude the option with jeans and a sweater - it will look rather original.

The kit always looks very winning

How to decorate

The knitted hat-chalma is decorated in the central part, but sometimes you can meet asymmetric models. Usually for this use rather large and bright decorations with pendants. You can also calculate the headdress with beads or sequins.

In some models, a large node is tied in the center, which gives the head desire a special form. This item can be left without an additional decor or put the decorations on top of it.

Chalma, which is part of the evening dress, can be decorated more exotic and extravagant. The design heads often attach feathers and artificial flowers.

Most to decorate brooches with large stones

Size calculation

Despite the decorative species, Chalm's knitting needles for women should clutch their head tightly, providing heat and comfort. This should correctly calculate the size.

For a cap made of rolled band, you will need to calculate the length and width of the web. In this case, the distance from one ear duct is measured to another and the resulting digit is divided by 4 - it will be a strip width. The length should be 2 times the scalp. The round model fit on the same standards, but without special calculations.

To find out the number of loops in a set row helps the creation of a test specimen of mating those threads and spokes, which will be carried out. Having attached to the ready-made fragment of a centimeter tape to the finished fragment, you can understand how many hinges are 1 cm of the canvas in width and height.

Even in the most simple cases, do not do without a trial fragment

Simple models for beginners

The cap-chalma knitting needles for girls is also good because it is not necessary to possess special skills to knitting. It is enough to be able to prick only the invalid and facial loops.

Chalma-bandage

This is the easiest option of creating a chalmic needles with a description. The model is based on the knitting of an ordinary scarf and the knitting scheme is extremely simple.

The headdress is open from above, but this does not lose its appeal

The master class consists of just three steps:

  1. Screw the required number of loops on the spokes.
  2. Tie a strip of a cloth with a length of 50 cm using a conventional gum 2x2.
  3. Sew the ends of the finished strip and pull the seam.

Finished cap-banding decorated in a narrow place with a volume decoration.

Closed model

This model of beginner knitting can be performed by any pattern. Those who love complex intricate patterns according to the scheme, it is enough to attach a fantasy.

Knitted hats-chalms with sparkling decorations have a special eastern charm

Below is step by step described how to knit the cap all the same elastic band with a detailed analysis in the photo:

  1. Knit a long strip in the size of the corresponding calculations.
  2. Mix the middle of the canvas.
  3. Collapse lettering by x.
So looks like a canvas at the beginning of the assembly
  1. End strips applied to the back of the head.
Ends should go to the middle line
  1. Send the ends of the canvas to the center of the strip.
Seam is performed by the same thread to make it imperceptible
  1. Perform 3 seams (2 side and 1 central), giving the product form.

Finished headdress decorate a large brooch.

Option with node

This model is not much different from the previous one. The main difference is that the strip should be tied on 4-5 cm longer. During the assembly, you must perform additional crossing in the frontal part, as shown in the photo, and then sew the product.

Using a mannequin simplifies stitching process

Model "Fan"

This version of knitting caps is entirely, without the need to twist or crosslinking the product. Such a turban consists of several segments of approximately the same width.

If desired, the number of segments can be increased by reducing their width
  • Dial 19 loops .
  • 1 r. Remove the edge, * 1 Pour, 2 facial *, knitting T * to * until the end of the row.
  • 2 r. - in drawing.
  • 3 r. - Edge, * 1 Pouring, 1 facial, accurate for the rear wall, and without removing it, 1 facial front wall, repeat from * to * to the end of the row.
  • 4 r. - in drawing.
  • Repeat rows 3-4, while the height of the canvase does not reach 4 cm.
There must be an elastic band from twisted flashers
  • Continue knitting with knitting needles, adding 5 loops in each facial row on areas with hinges. In order for the expansion of the segments to be uniform, the additions are performed on one side from twisted flavors, then on the other.
Segments will expand like a fan
  • When the width of the side segments will withdraw 6 of the outstanding loops, stop making an increase in them, adding new loops only in three central parts.
  • After the total width of the three central segments will be 11 outbreaks, stop the addition and continue to work without any additions.
  • Tie another 6 cm without adding.
Gradually the turban will begin to acquire the form
  • Continue to work, gradually reducing in each facial row of 5 loops in areas with hinges. In order for the segments to be uniform, the rebukes perform then on the one hand from twisted flavors, then on the other. As a result, 2 loops should remain from the central segment, and from all the others in 1 wrong loop.
This is how the finished product looks like
  • Divide the remaining 20 loops into two equal parts and tie on each of them a strip, about 30 cm long with the same twisted flavors.
Each strip should be ½ head girth
  • Strips fold the letter x and take to the back of the chalms.
  • Gently sew the strips with crochet or thick needle to side segments and connect in the rear.
When stitching should not be strongly filtered
  • Finished Women's Chapter-Chalme Spokes to turn out and decorate in front.

Chalma recently finds fans among the female representatives.

After all, it is in this headdress that you can always stay a woman who looks gorgeous. Its classic option provides for twisting from a long canvas, but our skillful needlewomen recreated it for winter cold.

Therefore, we want to give you inspiration with the explanation to tie the Chalm with their own hands.

How to tie a chalm, the turban do it yourself

How to tie a chalm: an easy way from the canvas

The basis of the knitting is a simple scarf. You can take any way, but the gum (any) will more successfully look. Moreover, it will be tightly forming the product shape itself. We offer you a simple variant of the formation of chum from knitted canvas.

Pattern, repeat, you can choose any. For example, voluminous gum will look very impressive. Alternatively, you can use for knitting the following schemes.

How to tie a chalm, the turban do it yourself

Pattern schemes

Next, you need to calculate the width of the canvas, pushing out from the report and the volume of your head. But on average, as in our example, you will need 21 loops. That is, it is 4 loops of the pattern 4 times = 16, plus 3 loops for symmetry, and 2 edges. When you have typed the desired number, then you check the first loop face!

To the extreme row was smooth and neat. After all, if you shoot it, the loop will go on two loops, so it can spoil the whole look. Then 2 persons. For symmetry and after already follow the report: 1 is ez., 3 persons. Complete also persons. And last wrong!

How to tie a chalm, the turban do it yourself

How to tie a chalm, the turban do it yourself

You can use a simple gum with thick yarn

After the reversal, make the first loop and tie 1 individuals. And follow exactly the same report. One medium loop should always coincide with the pattern. That is, to be on the one hand face, and on the other - only the wrong one. The rest of the loops alternate. Complete a number of 2 persons. and 1 is elevated. Note that if you knit on the wrong loop, then you need to make a loop for the front wall, and on the front - for the rear. The required bandwidth is approximately 90 cm. But focus on your head. Now you need to close the loop. To do this, just close them for the front wall with an invalid loop, and for the rear - with facial. And try not to tighten the hinges strongly. Restore, as shown in the diagram and sewing strips. First, make the seams on the back of the back, and after the side openings are already built. It is necessary to sew on the front side, tightening patterns with a break.

How to tie a chalm, the turban do it yourself

How to tie a chalm, the turban do it yourself

Knitana Chalma

Video: Knit Turban from the canvas

How to quickly contact Chalma with circular knitting needles?

This is one of the easiest and most quick options when even newcomer will be able to create such beauty. But it should be the first to specify the choice of the thread.

How to tie a chalm, the turban do it yourself

How to tie a chalm, the turban do it yourself

Rollers are formed due to alternation of rows

Learn better on thicker yarn. Also replicate your region. For example, for severe frosts, it is good to use Caucasian or merino yarn. By the way, the thick thread will be good to keep rollers. If you go to make a wool or alpaca, then be prepared to create an additional lining. For the spring-autumn period, it can be excluded. Now we determine the number of loops. If you have a thin thread, then 100 loops will need, for thicker yarn - 80. But in order not to guess, check the square 20 to 20. And already on this number of 1 cm you can calculate the desired set. Then the first roller will have the right vico. Slip 5 rows, but do not connect to the ring. That is, knit a number of involves, turn over the product and pass the facial loops on the pattern. And now we are closed in the ring. It is more convenient to work on small knitting needles. Otherwise, it will be necessary to stretch every time the fishing line. The facial row starts for the far wall, the second row is for the front.

How to tie a chalm, the turban do it yourself

Color and decorations set mood

In general, you should have 7 rollers out of 5 irons and facial rows. And so at the expense of this shift and protrusions will be formed. Now in the very last row of the facial segment starts to make the closure of the loops. In this case, they will not be seen, since the invalid row will hide with its protrusion. Relay through 4 loops. If you have a thin thread, then after 5. There are another 5 outbreak ranks. And now, spend the complete closure of the loops. It is worth connecting the third knitting needle and remove immediately from two sides. For this product in half and remove the neighbor, then the long loop. Now this resulting loop will return to the near needles. Take two loops on this and 1 for a long needker. And so repeat to the closure. I do not cut this thread to this thread, but it fastens the folds ahead of the Chalm. You can do this with the help of a needle, just stitching them a bit, but you can just stretch several times with the hook. And it remained to sew that segment when the work was not yet in a circle. In addition, it is necessary only to decorate the beautiful brooch and Chalma ready! By the way, you can perform the first rows of rubber band 1 to 1 or 2 on 2. The treatment will not lose its refinement.

How to tie a chalm, the turban do it yourself

Can be performed with rubber band

Video: Knit Chalm in a circle

How to tie a chalm to the needles?

We bring to your attention another version of knitting chalms. It can have several slightly modified interpretations. For example, you can adjust the thickness and number of harnesses. But the basic knitting from this does not change.

We propose to consider the option with 10 strips. To do this, it is necessary to make an elastic band 4-5 cm, 10-12 cm wide. Since the report provides for a replay of 6 loops and 2 edges. Therefore, in the end we have 30 loops. The first row is in line with a circuit 1 Innoral and 2 facial, while the very first loop make the front, the last one is invalid. Next scheme in the picture. 3 row are also starting with the facial for the beautiful edge and repeat the report: 1 is eva., Binding from 2 persons. Behind the back wall. That is, remove the loop, leaving behind the work, tie the next front loop and return to the removed.

How to tie a chalm, the turban do it yourself

Beginning of work

Take up the addition of 9 loops in each row. At the same time, note that it needs to be done in the face. To make a uniform increase, make an eye over first before the front loop, and later a row - after. But to minimize the resulting openings, then it is better to make an attachment before the invalid loop. True, in this case, the extension will have one slope.

How to tie a chalm, the turban do it yourself

Addition

It continues until you increase the amount of invalous loops to 11, and on extreme segments - 6 loops. And only after 5-6 cm, start to make such manipulation with reduction.

How to tie a chalm, the turban do it yourself

How to tie a chalm, the turban do it yourself

Reflection

As a result, you should also get out of 1 out. The loop in the extreme canvases and 2 is broken. In the middle. Segment segment 5 lanes. And continue to knit another 27-29 cm. But see how much you need for volume. Shoot them in the cross, as shown below.

How to tie a chalm, the turban do it yourself

Laying design

Stick these tails strips, more precisely their ends, with a styling segment at the very beginning. Output and post along the main design. Score that sewing needed from the front side, since the reverse seam can give too explicit bend. But thread is necessary just to push parts of the canvas.

How to tie a chalm, the turban do it yourself

How to tie a chalm, the turban do it yourself

Result

By the way, you can perform a gum wider. But in this case, then you should do and the initial cut is longer. Although we suggest excluding it at all. That is, start with 8-10 loops with a sharp increase of 2-3 loops in each facial loop in the next rows. For this, there is a facial loop to stick three times: crossed the front, behind the front wall, again for the back. On the involving side, touch the drawing. So do 4 rows. And then follow the drawing.

How to tie a chalm, the turban do it yourself

How to tie a chalm, the turban do it yourself

With a wide rubber band

Video: Knitana Chalma do it yourself

Chalma Spokes: Descriptions and schemes for beginners and experienced knitters

turban

The period of cold weather is not a reason to neglected in a stylish way in favor of rarely weather.

The base of the winter wardrobe is a warm headdress.

Jackets, fur coats, coats, shapeless down jackets are converted if the image is completed with an interesting cap.

The modern world of fashion from the season in the season demonstrates the original versions of this element of clothing. One of the successful trends for a long time Capper-Chalma is considered.

The edge of Eastern culture is not once fused into the life of Europeans. Each time it was firmly detained in the first positions of fashion tops. Today, the knitted spokes of Chalma is again popular.

Features of the product for a pleasant needlework

Chalma is the headdress of the Men East. According to her color, the material is evaluated by the welfare of the owner. Over time, women began to use it, complementing precious stones, decorations.

Historically, other names of Chalms were formed:

  1. Amomoma (Imam) is designed for the highest clergy. Sheehs, imams dress her.
  2. Dustor is a festive session. It is used by representatives of the nobility, rulers.
  3. Futa - designed for the people. She dresses merchants, artisans, ordinary city inhabitants.

The cap is often called the turban. They are almost equally wound around the head. The length of the chalme fabric is shorter, and its edge is smooth. This is the main difference between them.

In the photo Knitted Turbans and Chalms:

turban
turban
turban
turban
View of Chalim
turban

Another name is the people - Sultanka.

For the convenience of European fashionistas, designers came up with ready-made hats of identical shape. They are made from different materials according to the season.

Type of Chalim Features
Bandage Chalma-bandage

Easy performed. Does not require a high level of skill from knitters. For its manufacture, it will take at least actions: measuring the sizes of the head, the choice of pattern, the calculation of the loops, the density of knitting. It can be made in several versions. Sample warmer tie in two layers. For a more decorative option, add rhinestones, beads, beads, brooches. Density depends on the type of yarn. You can use any. Its selection depends on the season, the goals of socks. Mandatory element - interlacing of the canvas, a front knot.

Traditional hat-chalma More complicated version. Covers the whole head. A set of action for its manufacture - similar. Knits with different patterns. Ahead of traditional binding, knot.

Chalma has passed a long historical path before her modified species presented to us. A similar knitting product rightfully occupies a leading position in fashionable tops.

What you need for knitting, beauty creation

Knitted Chalma - a universal headpiece. In addition to the winter season, it is delivered in the spring, in the fall, even in the summer. The density of the product is regulated by the type of yarn, the size of the spice, the knitting method, pattern. The quality of the cap is largely dependent on the tools used to create it. The choice of the right materials is the key to the quality product.

Tool Season Recommendations
Spokes Winter The option of caps for cold weather, as a rule, knits from thick yarn. On its label, the necessary thickness of the spokes is always indicated. Usually use No. 5, No. 6, circular.
Spring Summer For the warm season, lighter options from fine yarn are knit. The spokes should be smaller about - №2, №3, №4.
Hook Winter, Spring, Summer It is used not only for making, but also to crosslink the product. Choose according to the instructions on the packaging of yarn.
Yarn Winter Sock during cold weather assumes that the tide will be warm. It is worth choosing yarn from wool with bulk threads. You can create original combinations. For example, to add merino, alpaca wool, Kid Mokher. This will provide additional heat.
Spring, autumn In the warm season for the manufacture, thin, cotton threads are used. For example, Iris. Yarn should be natural origin.

Simple options for debutants

Some beginner knitters frighten the images of the product that creates the impression of a difficult task. Due to the imaginary level of complexity, they postpone the knitting scheme, depriving themselves from the original UBOR. There are a number of options that are very easy to execute. They will be able to realize even a person without much experience. It is enough to be able to keep the knitting needles in your hands, to know the facial, the outstanding loops.

From scarf.

The easiest, but no less original version is Chalma from Scarf. To perform it, you will need:

  1. Paired needles. A more dense option will be obtained by No. 5.
  2. 2 Mokes of thick yarn (50x50 wool with acrylic). You can add mohair, Lurex for shine.

Legend:

  • l - facial loop;
  • and - the wrong loop;
  • n - nakid;
  • cr - edge;
  • P - row;
  • P - loop;
  • ** - product rapport.

The main canvas knits a classic elastic band. On the working needles, the odd number of loops are gaining according to the necessary size. Description of the chapter scheme:

  • 1st row - 1 kr, * l *, 1 kr;
  • 2nd p - * l, n, 1 p to remove on the needle (thread behind work) *;
  • 3rd r- * n, 1 η remove without tissue, l + n together *;
  • 4th P and subsequent repeat according to the pattern.

In this sequence, knit about 90 cm. Then wrap the resulting scarf around the head, twisting in the middle. Loose ends to sew to the canvase. Ibject or crochet perform seam in the middle.

For a more dense adjacent of the edge to the head you can bind the crochet.

After carrying out the work on stitching a hat from a scarf ready.

Chalma from Scarf.

Chalma from Scarf.

Easy way number 2.

The second easy way to create an original hat, for which you will need:

  1. Spokes number 5, №6.
  2. Fat yarn (wool, mohair, acrylic).

Legend:

  • l - facial loop;
  • and - the wrong loop;
  • P - row;
  • P - loop;
  • ** - product rapport.

Screw the even number of loops on the needles. How to tie with your own hands according to the scheme:

  1. 1st row: 1kr, * 4 l, 4 and *, 1 kr.;
  2. 2nd and subsequent ranks: repeat the pattern.

Perform this sequence is depending on the desired size. Then connect to the ring. Place the resulting product crossed ends up. Then sew them to the remaining canvase.

The video shows the full version of the creation of simple knitted spokes of Cham:

With loop adding

For this model use thin needles. Yarn is chosen depending on what time of year is supposed to wear a product.

Circuit for 12 loops:

  • 1st p: l;
  • 2nd p: and;
  • 3rd p: * 1I; 2l *;
  • 4th r and all even: in drawing;
  • 5th p: * 1I 2l Crosspin the right (2nd loop to penetrate the face for the back wall, without removing from the needles, and 1st for the front wall, remove on the second knitting needles) *.

Repeat rapport 8-10 rows (approximately 4 cm). Then to start the addition of the loops: in each facial row, it is evenly adding to 5 loops in each crossed loop. Thus knit 28 rows (12-14 cm). Continue according to the scheme without adding. After 5 cm of the canvas, start the outflow: in each hollow row to penetrate 2 loops between crossed. The remaining 4 cm clearly follow the scheme. Close knitting any convenient way. The product is ready.

Another simple chalms

We use english gum

Chalma English rubber band

The main pattern for the English gum is a gum from 4-out, 4-facial.

Yarn choose depending on the socks season.

The spoke number will be indicated on the label of the thread.

Approximate yarn - 200 gr.

Recommendations for knitting:

  1. Measurement of the scalp.
  2. Calculation of the number of loops. The resulting volume is divided by half. The result is the width of the header.
  3. Dial the hinges on the working knitting needles. Consider 2 edges.
  4. Tie a gum required length.
  5. Close loops.

On the photo on the right shows how the Türban hat can look, knitted by English elastic.

In order to form a chalm from a knitted product, it is necessary to cross its ends, take them back, attach to the main canvase.

English rubber band

Master class, how to bind a gum of English type:

Beautiful relief

Relief knitting

Simple embossed knitting scheme

The rapport of the pattern should consist of a loop amount, a multiple of six. Excluding the edge, another central.

The canvas should be a width of at least 10 cm.

After a set of loops on the knitting needles, you should mark the central thread of another color.

After the end of knitting the thread remove.

To create a high-quality product with relief elastic bands worth useing some tips:

  1. 1st P (facial): 1 kr, * 1 p remove not past, 1 and 2 l *, 1 kr.
  2. 2nd p (invalid) and all even: 1 kr, * 1 П to remove not cluttered, knitted in drawing *, 1kr.
  3. 3rd p (facial): 1 kr, * 1 П to remove not past, 1 and 2 p crossed *, 1 kr.
  4. 5th row and all odd knit according to the third scheme.

Relief rubber band

After five centimeters of the canvas, it is necessary to make an increase in reliefs.

To do this, in each row evenly encourage five wrong loops.

After adding in the side parts, six loops should turn out, in the central - at eleven.

Further, the nipper continues strictly according to the scheme.

Then conduct uniform blasting.

Close loops, sew a product.

On the picture on the left you can understand how a relief gum looks like on a chalme.

The drawing is especially noticeable on bright yarn.

Embody different designs into reality

Bandage

bandage

One of the most simple variants of Türban needles for girls in this style.

It is possible to knit it from any thread like a way.

One of the most interesting patterns is pearl.

After determining the width of the product, the calculation of the necessary loops can be processed.

Use better circular needles. It will reduce knitting time, as the process will be carried out much more convenient.

Looks like a cloth in a circle of the required length.

After closing the loop, the product is twisted in the middle, sew a needle, crochet.

The bandage is ready.

Video describes in detail how to tie a bandage in the form of a chalm.

Lush shape

Lush Chalma

For magnificent turban, the needles are best suitable for thick yarn with an added thread of mohair. The needles will be required under No. 5. Knitting the main canvas is performed by a rubber band according to the following scheme:

  1. Dial the required number of loops. Tie 56 cm (approximately 100-110 rows). Close loop, leaving a big thread. It will be required to fix the product.
  2. The resulting rectangle is connected. Seam it must be in the middle. Elastic band should not stretch.
  3. Fit the product with a neat stitch top.
  4. Separate thread to collect the forefront of the chalms. This will form a decorative node.
  5. In order to collect the edge of the caps, it is necessary to go through the needle with the thread to go through the usual seam all over the perimeter. Then tighten the thread.

Before assembling the canvas in a single product, it is sipped. Thanks to this, the edges are visible clearly, and the hat is especially magnificent.

Lush Chalma

With pattern

For a beautiful pattern, thin two-color threads are suitable: 45% wool, 55% acrylic. Spokes of paired number 5. The hat will be made of several shades of gray. Their alternation in the "Christmas tree" pattern creates an original version of the UBOR for the head.

Picture with a description of the creation of knitted chylma:

Chalma with a pattern

How to knit:

  • 1-yd: cr, l, and, l, * knit on the pattern of 20 loops *, l, and, l, and, kr.
  • 2nd p: kr, and, l, and, * knit on the pattern *, and, l, and, l, cr.

Then about 50 cm repeated 1-2 row. Remove the first color, to attach the second. Continue knitting. As soon as the required length is achieved, you can close the loops. To get the finished product, one part of the canvase is folded in half. The second - they fought inside the resulting rings. Both ends stitch each other. It turned out a spectacular option with a pattern.

Knit crochet

CHALMA, made by crochet, is a wonderful option for winter, autumn. It can be combined with different clothes in style. The most harmonious version of this Upora knits from thick yarn, crochet number 4. Depending on the selected pattern, you can create several original hats.

Light scheme

The selected thread should be thick. It knits the cloth by type of scarf. Initially, you need to dial a certain number of air loops. Standard set - chain 90 cm.

Legend:

  • 1 ST B / N - one column without a Nakid;
  • 1 st s / n - one column with nakid;
  • 1 Waedo n under - one air lift air loop.

How to bind a crochet:

  • 1st p: 1 Rev. P UB, 1 ST B / N in each loop;
  • 2nd p: 2 Walls n under, relief columns with nakidami;
  • 3rd p: 2 Waedo n under, embossed facial columns with nakidami.

Then for 12 cm there is an alternation of the second and third row. After two rows, tied the columns without nakidov. Close knitting.

Stitched product according to the scheme.

idle tie chalm

On the video master class Knitting Chanma Crochet:

Openwork

Openwork patterns made by crochet look very impressive, presentable. Their use is a modern version of the Winter Upora. The following recommendations should be followed when creating an original instance:

  1. Select threads, spokes. The yarn is selected medium thickness. The hook is suitable under No. 4.
  2. The number of necessary loops is calculated.
  3. Crochet recruit air loops.
  4. Knitting according to the scheme.
  5. After executing the frame, the pattern should be a web with a length of 40-45 cm.
  6. Then knitting is separated into two parts with an equal number of loops. Work continues. At each half, the same pattern is pronounced.
  7. You must accumulate the product. Rubbed half the half should gently sew in the edges. From the wrong side of the invisible seam to grab them at the very reason, to bore with each other.

Crochet:

Openwork with hook

Openwork crochet pattern

Stitching

Stitching correctly

Knitting process is a time-consuming occupation. This is just half the path done. An important point is the assembly of all parts into one. For a qualitatively executed Upora, you must do the following steps:

  1. Start standing from the height of the header. Score her on the spokes. It will turn out 24 loops (for example). After plugging a row equal to half of the circle of the head.
  2. The loop obtained is divided into equal parts. The left part of the product should be removed on an extra needle, fix the pin. Add four rows of loops to the right side. Then change the places of half, returning them to one needle. Peel the left loop.
  3. Perform the closure of the row.
  4. After that knit the English Elastic pattern. After 8-10 rows, go to the usual with an alternation of the facial, the wrong loops.
  5. Form bottom caps. Peel two rows of a cycle knitting.
  6. Perform the relevant. Put in several rows of loops together.
  7. Alternate the usual mating with the reduction of the loops. As a result, eight pieces should remain on the canvas.
  8. The last loops will pull the thread.

All parts of the Upora should be fine before you finally sew. In the process of crosslinking, it is possible to apply a semi-finished sample to the head, squeezing areas for seams. The amount of operation of the needle depends on the holes formed when knitting. The ideal version of the average for the complexity of the Chalma has four seams: medium horizontal, from the sides of one vertical, vertical in the middle.

Sometimes I don't have a little needle. It is enough to build a couple of plots.

After the manipulations conducted, the diligent knitter will be awarded an exclusive knitted masterpiece.

What to wear: try to assume

The turban can approach business, everyday, festive images. It will create an emphasis, will become a highlight. Due to the variety of textures, color range, patterns can be created many options for any output. Welcome hats of natural shades: beige, gray, brown, blue, green. The choice of color may depend on the time of year, events, moods.

Knitted Chalma is a warm, cozy accessory. It will fit perfectly in the casual wardrobe. On the winter day it can be worn with a warm jacket, fluffy mittens, comfortable shoes. Spring to wear with a coat and high boots.

If you plan to go to a solemn event, then openwork Chalma with stones, brook or beads will perfectly complement the evening image.

Business negotiations in a strict trouser costume and a nude hat will have stunning success.

The colors of the caps can be combined with the upper clothes, shoes, other elements of clothing. They may also differ from each other for several shades. This is a really universal headdress. Original style, the decor will attack the East mysteriousness in the selected image.

In the photo different options for combinations of caps-chalms with other elements of clothing:

Chalma is a historical trend. From year to year, he appears in the shows of famous designers. A unique trendy accessory diversifies the wardrobe, surprising surrounding his originality.

In this topic, we will look at how to tie Chalm.

Chalma recently finds fans among the female representatives. After all, it is in this headdress that you can always stay a woman who looks gorgeous. Its classic option provides for twisting from a long canvas, but our skillful needlewomen recreated it for winter cold. Therefore, we want to give you inspiration with the explanation to tie the Chalm with their own hands.

How to tie a chalm: an easy way from the canvas

The basis of the knitting is a simple scarf. You can take any way, but the gum (any) will more successfully look. Moreover, it will be tightly forming the product shape itself. We offer you a simple variant of the formation of chum from knitted canvas.

  • Pattern, repeat, you can choose any. For example, it will be very impressive Volumetric gum. Alternatively, you can use for knitting the following schemes.
Schemes
Pattern schemes
  • Next, you need to calculate the width of the canvas, pushing out from the report and the volume of your head. But on average, as in our example, you will need 21 loops. That is, it is 4 loops of the pattern 4 times = 16, plus 3 loops for symmetry, and 2 edges.
  • When you scored the desired number, then Slip the first loop face! To the extreme row was smooth and neat. After all, if you shoot it, the loop will go on two loops, so it can spoil the whole look. Then 2 persons. For symmetry and after already follow the report: 1 is ez., 3 persons. Complete also persons. and Last invalid!
You can use a simple gum with thick yarn
You can use a simple gum with thick yarn
  • After the reversal, make the first loop and tie 1 individuals. And follow exactly the same report. One medium loop should always coincide with the pattern. That is, to be on the one hand face, and on the other - only the wrong one. The rest of the loops alternate. Complete a number of 2 persons. and 1 is elevated. Note that if you knit on the wrong loop, then you need to do a loop for the front wall, and on the front-hand.
  • Knit the required band length - approximately 90 cm. But focus on your head. Now you need to close the loop. To do this, just close them for the front wall with an invalid loop, and for the rear - with facial. And try Do not tighten the loops.
  • Watch as shown in the diagram and sewing strips. First, make the seams on the back of the back, and after the side openings are already built. Need to sew on the front side, Stretching patterns.
Discharged Chalma
Knitana Chalma

Video: Knit Turban from the canvas

How to quickly contact Chalma with circular knitting needles?

This is one of the easiest and most quick options when even newcomer will be able to create such beauty. But it should be the first to specify the choice of the thread.

Rollers are formed due to alternation of rows
Rollers are formed due to alternation of rows
  • Learn better on thicker yarn. Also replicate your region. For example, for severe frosts, it is good to use Caucasian or merino yarn. By the way, the thick thread will be good to keep rollers. If you go to make a wool or alpaca, then be prepared to create an additional lining. For the spring-autumn period it will be possible to exclude.
  • Now determine the number of loops. If you have a thin thread, then It will take 100 loops for thicker yarn - 80. But in order not to guess, check the square 20 to 20. And already on this number of 1 cm you can calculate the desired set.
  • Start work with involving rows! Then the first roller will have the right vico. Slip 5 rows, but do not connect to the ring. That is, knit a number of involves, turn the product and pass through the facial loops on the pattern.
  • And now we are closed in the ring. It is more convenient to work on small knitting needles. Otherwise, it will be necessary to stretch every time the fishing line. The facial row starts for the far wall, the second row is for the front.
Color and decorations set mood
  • In general, you should get 7 rollers out of 5 irons and facial rows. And so at the expense of this shift and protrusions will be formed. Now in the very last row of the facial segment starts to make the closure of the loops. In this case, they will not be seen, since the invalid row will hide with its protrusion.
  • Close through 4 loops. If you have a thin thread, then after 5. There are another 5 outbreak ranks. And now, spend the complete closure of the loops. It is worth connecting the third knitting! Removing immediately from two sides.
  • For this, the product fold in half and remove the neighbor, then the long loop. Now this resulting loop will return to the near needles. Take two loops on this and 1 for a long needker. And so repeat to closure.
  • Now I do not cut this thread, but it fastens the folds ahead of the Calma. You can do this with the help of a needle, just stitching them a bit, but you can just stretch several times with the hook. And it remains to sew that segment when the work was not yet in a circle.
  • In conclusion you only need to decorate the beautiful brooch and Chalma ready!
  • By the way, you can perform the first rows of rubber band 1 to 1 or 2 to 2. The treatment will not lose its refinement.
Can be performed with rubber band
Can be performed with rubber band

Video: Knit Chalm in a circle

How to tie a chalm to the needles?

We bring to your attention another version of knitting chalms. It can have several slightly modified interpretations. For example, you can adjust the thickness and number of harnesses. But the basic knitting from this does not change.

  • We propose to consider the option with 10 strips. To do this, it is necessary to make an elastic band 4-5 cm, 10-12 cm wide. Since the report provides for a replay of 6 loops and 2 edges. Therefore, in the end we have 30 loops.
  • The first row is in line with a circuit 1 Pour and 2 facial, while the very first loop make the front, the last one is invalid.
  • Follow the diagram in the drawing. 3 row are also starting with the facial for the beautiful edge and repeat the report: 1 is eva., Binding from 2 persons. Behind the back wall. That is, remove the loop, leaving behind the work, tie the next front loop and return to the removed.
Beginning of work
Beginning of work
  • Start Addition of 9 loops in each row. At the same time, note that it needs to be done in the face. To make a uniform increase, make an eye over first before the front loop, and later a row - after. But to minimize the resulting openings, then it is better to make an attachment before the invalid loop. True, in this case, the extension will have one slope.
Addition
Addition
  • It continues until you increase the amount of invalous loops to 11, and on extreme segments - 6 loops. And only after 5-6 cm, start to make such manipulation with reduction.
Reflection
Reflection
  • As a result, you should also get out of 1 out. The loop in the extreme canvases and 2 is broken. In the middle.
  • Separate the segment of 5 lanes. And continue to knit another 27-29 cm. But see how much you need for volume. Shift them back As shown below.
Laying design
Laying design
  • Stick these tails strips, more precisely their ends, with a styling segment at the very beginning. Take and post along the main design.
  • Note that it is necessary to sew from the front side, since the reverse seam can give too explicit bend. But thread is necessary just to push parts of the canvas.
Result
Result
  • By the way, you can perform a gum wider. But in this case, then you should do and the initial cut is longer. Although we suggest excluding it at all. That is, start with 8-10 loops with a sharp increase of 2-3 loops in each facial loop in subsequent rows.
  • To do this, there is a facial loop to stick three times: crossed front, behind the front wall, again for the back. On the involving side, touch the drawing. So do 4 rows. And then follow the drawing.
With a wide rubber band
With a wide rubber band

Video: Knitana Chalma do it yourself

ZimyshKazima.

Evaluate Article.

Добавить комментарий